Standard or MAX Range
Pulse
Standard or MAX Range
Encoder
The Range Encoder MDT has a true encoder interface that directly reads the meter face value of encoded meters to transmit an absolute reading towards the DCAP every hour. It auto-detects the data format between Sensus meters, Sensus compatible meters (Master-Meter, Badger, etc.), and Neptune meters. The MDT is available either with a single encoded input for single meter usage or dual encoded inputs for co-located hot and cold water meters. A special Pulse + Encoder Dual MDT is also available.
Standard or MAX Range
Display MDT
The Tehama Wireless Display MDT combines our proven MDT transceiver with an LCD display to provide the easiest and most accurate way to comply with tenant meter reading access requirements in California and elsewhere. Available for both Pulse and Encoder meters, with dual input hot/cold models available, the Display MDT is designed to be placed inside tenant space and wired to the meter(s). The LCD screen displays the consumption for 60 seconds when the button is pushed, toggling between hot/cold for dual input models.
Standard or MAX Range
Outsider®
Standard or MAX Range
Submersible
The Tehama Wireless Submersible MDT combines our MAX Range MDT with a dedicated enclosure with epoxy encasement to provide a fully waterproof product. It comes in 2 variations, a backward compatible version that operates in existing Tehama networks and our new MAX Range version. All Submersible MDTs now include an internal temperature sensor for freeze detection.
Standard or MAX RAnge
Leak Detection
The Leak Detection MDT helps property owners monitor for water leaks near hot water tanks, under sinks, boiler/basement room floors, or anywhere that water could flood or damage the property. When water is detected, a message is immediately sent to the DCAP allowing an alert via email.
Standard or MAX Range
Runtime
The Tehama Wireless Runtime MDT records the on-time in seconds for the most accurate measurement available, and transmits the running count via radio to the DCAP once an hour. Versions of the Runtime MDT can detect a 24VAC zone valve control state or a dry contact or relay switch input. Optionally the unit can be ordered with an internal temperature sensor for ambient readings or with the dry contact version an external thermistor for location accurate measurements.
Pulse
Description
The Pulse MDT records data from meters that generate a pulse output and transmits the totalizer data via radio towards the DCAP every hour. It is compatible with nearly all water, gas and electric utility meters that use a reed switch or a piezoelectric pulse generator. The MDT is available either with a single pulse input for single meter usage or dual inputs for co-located hot and cold water meters or other two-meter combinations.
Features
- The Standard Range MDTs have an open field range over 3500 feet and MAX Range Pulse MDTs have a ten-mile open field range
- The MDT is powered by two AA batteries with expected battery life of five to seven years
- Top-of-the-hour synchronize Time of Use (ToU) with 15-minute interval data
- Generated Pulse version for older Hersey and newer Zenner meters
- IP-68 rated Submersible version for pit or outdoor installation
ft+
Standard Open Field Range
mile
MAX Open Field Range
Encoder
Description
The Range Encoder MDT has a true encoder interface that directly reads the meter face value of encoded meters to transmit an absolute reading towards the DCAP every hour. It auto-detects the data format between Sensus meters, Sensus compatible meters (Master-Meter, Badger, etc.), and Neptune meters. The MDT is available either with a single encoded input for single meter usage or dual encoded inputs for co-located hot and cold water meters. A special Pulse + Encoder Dual MDT is also available.
FEATURES
- The Standard Range Encoded MDT has an open field range of over 3500 feet and MAX Range Encoded MDT has a ten-mile open field range
- It is shipped with two AA batteries for expected battery life of five to seven years
- MDT also reads Units, Count Factor, Hot/Cold from GWF meters
- IP-68 rated Submersible version for pit or outdoor installation
3500 ft+
Standard Open Field Range
10 mile
MAX Open Field Range
Display MDT
Description
The Tehama Wireless Display MDT combines our proven MDT transceiver with an LCD display to provide the easiest and most accurate way to comply with tenant meter reading access requirements in California and elsewhere. Available for both Pulse and Encoder meters, with dual input hot/cold models available, the Display MDT is designed to be placed inside tenant space and wired to the meter(s). The LCD screen displays the consumption for 60 seconds when the button is pushed, toggling between hot/cold for dual input models.
The Tehama Remote
Display is a display-only model without the AMR radio. It can be used if an existing AMR system is already installed or is not required. It comes with all the other benefits of our Display MDT including a very easy to use programming method.
FEATURES
- Available in Standard Range and new MAX Range models
- Display shows units (Gallons or Cubic Feet) and Hot/Cold for dual units
- Mounts on standard single-gang electrical box for a professional looking installation
- NTEP certified. Approved for use in California
- Simple configuration via our CIT software using a communication cable
- Up to 3500 foot open field range
- LED indication for RF network status
- FCC certified for US and Canada
3500 ft+
Open Field Range
Outsider®
Description
The Outsider® MDT combines direct meter reading with our proven AMR radio to provide a quick and simple assembly process. Our Outsider™ MDT slides directly onto the register housing of all NMT SingleMag™ and VersaMag™ water meters, secured by a single screw. With no wiring involved, we have eliminated the common errors that can occur during shipment and installation.
Like all our MDTs, the battery life exceeds five years and the AA batteries are field replaceable. The Outsider® MDT includes the case with locking ring, the MDT with batteries, and the screw for securing it to the meter register.
FEATURES
- Available in Standard Range and new MAX Range models
- Up to 3500 foot open field range for Standard Range models and up to 10 miles open field range for MAX Range models
- Powered by two AA batteries with expected battery life of five to seven years
- Easy-to-Install: Slides onto the register of any NMT SingleMag or VersaMag water meter
- Plumber installations: With the integrated meter and MDT, a plumber can install everything at each meter point
- Reliable: Combining the proven technologies of Tehama and NMT in an easy to install system helps ensure proper and long-lasting installations
3500 ft
Standard Open Field Range
10 mile
MAX Open Field Range
Submersible
Description
The Tehama Wireless Submersible MDT combines our MAX Range MDT with a dedicated enclosure with epoxy encasement to provide a fully waterproof product. It comes in 2 variations, a backward compatible version that operates in existing Tehama networks and our new MAX Range version. All Submersible MDTs now include an internal temperature sensor for freeze detection.
FEATURES
- Up to 3500 foot open field range for Standard Range models and up to 10 miles open field range for MAX Range models
- Lithium battery lasts 10- 15 years
- Pulse Model compatible with nearly all utility meters
- Encoder Model to read Sensus & Neptune meters
- Easy installation in pit meters : can be screwed or taped to the bottom of the plastic pit lid
- LED indication for RF network status
- Magnet activation for instant transmission, status and for On/Off state
- FCC certified for US and Canada
3500 ft
Standard Open Field Range
10 mile
MAX Open Field Range
15 year
Lithium Battery Life
Leak Detection
Description
The Leak Detection MDT helps property owners monitor for water leaks near hot water tanks, under sinks, boiler/basement room floors, or anywhere that water could flood or damage the property. When water is detected, a message is immediately sent to the DCAP allowing an alert via email.
FEATURES
- Two-foot long water sensing cable
- Fully sealed MDT has a typical battery life of over 10 years
- Can detect freezing conditions with ability to send temperature-based alerts
- Up to 2 miles open field range for Standard Range models and up to 10 miles open field range for MAX Range models
2 mile
Standard Open Field Range
10 mile
MAX Open Field Range
10 year+
Battery Life
Runtime
Description
The Tehama Wireless Runtime MDT records the on-time in seconds for the most accurate measurement available, and transmits the running count via radio to the DCAP once an hour. Versions of the Runtime MDT can detect a 24VAC zone valve control state or a dry contact or relay switch input. Optionally the unit can be ordered with an internal temperature sensor for ambient readings or with the dry contact version an external thermistor for location accurate measurements.
FEATURES
- Five year battery life under normal conditions. -Optional line powered variation for the dry contact switch
- The Time of Use option adds an on-board memory and 15 minute interval data backup
- DCAP’s time is set regularly via the Internet and tied to stratum 2 atomic clocks
5 year
Battery Life
